Installing custom roller blinds typically involves a few straightforward steps. Here’s a general guide to help you get started:
1. Gather Tools and Materials:
- Custom roller blinds with mounting hardware
- Measuring tape
- Pencil
- Level
- Screwdriver or drill with appropriate bits
- Step ladder (if necessary)
2. Measure Your Window:
- Measure the width of the window frame where you want to install the blinds.
- Decide on the height you want the blinds to hang and measure from there down to the windowsill or floor.
3. Mounting Brackets:
- Typically, roller blinds come with mounting brackets. Position these brackets according to your measurements and the manufacturer's instructions.
- Use a pencil to mark where the screws will go for each bracket.
4. Pre-Drill Holes:
- If necessary, use a drill to create pilot holes for the screws. This can prevent wood or drywall from splitting and make it easier to insert the screws.
5. Install Brackets:
- Attach the brackets securely to the wall or window frame using screws provided. Make sure the brackets are level using a spirit or bubble level.
6. Install the Roller Blind:
- Depending on the type of roller blinds, you may need to insert the blind into the brackets or attach the blind to the brackets according to the manufacturer's instructions.
- Ensure the blind operates smoothly and locks into place in the brackets.
7. Test Operation:
- Once installed, test the roller blind to ensure it rolls up and down smoothly and that it covers the window adequately.
8. Adjust if Necessary:
- If the blind isn’t level or if adjustments are needed, loosen the brackets slightly and reposition them until the blind hangs correctly.
9. Secure Cords (if applicable):
- If your blinds have cords or chains for operation, make sure they are secured properly to prevent entanglement or hazards, especially if you have children or pets.
10. Clean Up:
- Remove any packaging materials or debris from the installation area.
11. Enjoy Your New Blinds:
- Once everything is installed and tested, enjoy the privacy and aesthetic appeal of your custom roller blinds!
Always refer to the specific instructions provided by the manufacturer of your custom roller blinds, as installation steps can vary slightly depending on the type and design of the blinds. If you’re unsure about any part of the installation process, contact us on 1800 243 242 and one of our expert technicians will discuss the process with you.
